Canon website provides you a safe, secure, and reliable platform for downloading the driver. Canon IJ Setup process takes a few minutes in device installation and software installation.
canon ij setup | ij scan utility download | ij scan utility | ij scan utility for windows 10
Prepare the Printer
Place the printer on a flat and horizontal surface, and do not place any objects in front of the printer. Open the Rear Tray and extend the Paper Support. Open the Front Tray, and extend the Output Tray Extension.
Plug the power cord in the back of the printer and connect the other end to the wall outlet.
Press the POWER button to turn on the printer.
Open the Top Cover(A). The Print Head Holder moves to the center.
Install the Print Head
Remove the Print Head from its package.
Remove the orange protective cap(A) from the Print Head and discard it.
Firmly raise the Print Head Lock Lever until it stops. The Print Head Lock Lever may feel heavy.
Insert the Print Head.
Push the Print Head to hold it in place, and lower the Print Head Lock Lever carefully.
Make sure that the Print Head is installed correctly.
Install the Ink Tanks
Pull the orange tape in the direction of the arrow to peel off the protective film and remove the film completely.
Twist off and discard the orange protective cap(B) located on the bottom of the ink tank.
Insert the ink tank into the right-hand slot and press the [PUSH] mark on the ink tank until it clicks into place.
Make sure the ink lamp lights red.
Close the Top Cover.
Hardware setup is complete.
This May Help,
Peter